Assessment of the structural conditions in steel pipeline under various operational conditions – A machine learning approach

dc.contributor.authorSaade, Michel
dc.contributor.authorMustapha, Samir A.
dc.contributor.departmentDepartment of Mechanical Engineering
dc.contributor.facultyMaroun Semaan Faculty of Engineering and Architecture (MSFEA)
dc.contributor.institutionAmerican University of Beirut
dc.date.accessioned2025-01-24T11:32:49Z
dc.date.available2025-01-24T11:32:49Z
dc.date.issued2020
dc.description.abstractOil and water transport pipeline systems are susceptible to damage due to harsh environmental conditions and operational factors. Hence, ongoing maintenance and inspection are required. The development of continuous and reliable monitoring will ensure the safe usage of these structures and assist in the extension of their life spans. In this study, the monitoring and assessment of pipelines are performed using a network of Fiber Bragg Grating (FBG) sensors mounted in the longitudinal and circumferential directions pipelines. The sensitivity of these measurements to assess pipe pressure and flow variations, and leakage detection and localization were evaluated. Water, at a controlled pressure and flow rate, was pumped into the designed 6-m pipe testbed. Leakage was simulated by opening one of the four designated valves installed on the pipe. Support Vector Machine (SVM) algorithms were implemented, using the collected data, to assist in the prediction of the structural condition of the pipe under various operational conditions. Pressure variations inside the pipe highly impacted the amplitude of the measured strain, increasing it significantly up to 20%. A flow rate increase of 5 GPM had the inverse effect, resulting in a 5% decrease in the amplitude of the measured strain. A change of leakage hole size greatly influenced the measured signal, resulting in a 55% change in amplitude between a 2-cm2 and a 5-cm2 hole. To determine the leakage location, only the temporal aspects of the signal were affected, resulting in slight shifts in sensor response times. The developed SVM classifiers reached accuracies of 88% for flow rate classification, greater than 95% for pressure classification, and 100% for leakage size classification. The accuracy of leakage localization did not exceed 72%. These results are promising for the monitoring of the structural conditions related to leakage detection and localization, based on the patterns observed. © 2020 Elsevier Ltd
dc.identifier.doihttps://doi.org/10.1016/j.measurement.2020.108262
dc.identifier.eid2-s2.0-85088400201
dc.identifier.urihttp://hdl.handle.net/10938/27880
dc.language.isoen
dc.publisherElsevier B.V.
dc.relation.ispartofMeasurement: Journal of the International Measurement Confederation
dc.sourceScopus
dc.subjectFiber optic sensing
dc.subjectMachine learning
dc.subjectPipe condition monitoring
dc.subjectStructural health monitoring
dc.subjectFiber bragg gratings
dc.subjectFiber optic sensors
dc.subjectPetroleum transportation
dc.subjectSensitivity analysis
dc.subjectSupport vector machines
dc.subjectCircumferential direction
dc.subjectEnvironmental conditions
dc.subjectFiber bragg grating sensors
dc.subjectLeakage detection and localizations
dc.subjectMachine learning approaches
dc.subjectMaintenance and inspections
dc.subjectMonitoring and assessment
dc.subjectSupport vector machine algorithm
dc.subjectPipelines
dc.titleAssessment of the structural conditions in steel pipeline under various operational conditions – A machine learning approach
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
2020-6389.pdf
Size:
3.44 MB
Format:
Adobe Portable Document Format