Steam gasification modeling of polyethylene (PE) and polyethylene terephthalate (PET) wastes: A case study

dc.contributor.authorZallaya, Sara
dc.contributor.authorEl Achkar, Jean H.
dc.contributor.authorChacra, Alice Abou
dc.contributor.authorShatila, Samir
dc.contributor.authorEl Akhdar, Jinane
dc.contributor.authorDaher, Yousef
dc.contributor.departmentDepartment of Chemical and Petroleum Engineering
dc.contributor.facultyMaroun Semaan Faculty of Engineering and Architecture (MSFEA)
dc.contributor.institutionAmerican University of Beirut
dc.date.accessioned2025-01-24T11:26:37Z
dc.date.available2025-01-24T11:26:37Z
dc.date.issued2023
dc.description.abstractThis paper is the first to study the effect of adding PET, separator, and financials on a PE steam gasification plant based in Lebanon. The main aim is to shed light on the possibility of valorizing plastic wastes while reducing the environmental impact of landfilling and creating benefits. Using Aspen Plus, a plant that can turn plastic waste into syngas is designed and modeled. PE and PET model inputs of 797 and 500 kg/hr, respectively, were chosen based on Lebanese data. The addition of PET did not significantly improve the mole fractions of the end product when compared with PE only as an input feed. The final optimum conditions of this model were chosen based on sensitivity analyses of different parameters. There were concluded to be a temperature of 800 °C, pressure of 1 atm, Steam/Feed mass ratio of 0.57, water flowrate of 745 kg/hr, and syngas LHV of 9.45 MJ/Nm3. Calculations showed a total Net Present Value 6 times larger than the initial investment and a Payback Period of 2 years by implementing the model. Although based on a Lebanese case study, this research will urge the establishment of sustainable waste and financial policies in countries facing the same issues. © 2022 Elsevier Ltd
dc.identifier.doihttps://doi.org/10.1016/j.ces.2022.118340
dc.identifier.eid2-s2.0-85143500401
dc.identifier.urihttp://hdl.handle.net/10938/26652
dc.language.isoen
dc.publisherElsevier Ltd
dc.relation.ispartofChemical Engineering Science
dc.sourceScopus
dc.subjectAspen plus
dc.subjectGasification
dc.subjectPlastics
dc.subjectSimulation
dc.subjectSyngas
dc.subjectWaste-to-energy
dc.subjectComputer software
dc.subjectEnvironmental impact
dc.subjectInvestments
dc.subjectPlastic bottles
dc.subjectSensitivity analysis
dc.subjectSynthesis gas
dc.subjectCase-studies
dc.subjectGasification model
dc.subjectGasification plants
dc.subjectLebanon
dc.subjectPlastics waste
dc.subjectSteam gasification
dc.subjectSyn gas
dc.subjectWaste to energy
dc.subjectPolyethylene terephthalates
dc.titleSteam gasification modeling of polyethylene (PE) and polyethylene terephthalate (PET) wastes: A case study
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
2023-5468.pdf
Size:
672.54 KB
Format:
Adobe Portable Document Format