Degradation of theophylline in a UV254/PS system: Matrix effect and application to a factory effluent
| dc.contributor.author | Al Hakim, Suha | |
| dc.contributor.author | Jaber, Saly | |
| dc.contributor.author | Zein Eddine, Nagham | |
| dc.contributor.author | Baalbaki, Abbas | |
| dc.contributor.author | Ghauch, Antoine | |
| dc.contributor.department | Department of Chemistry | |
| dc.contributor.faculty | Faculty of Arts and Sciences (FAS) | |
| dc.contributor.institution | American University of Beirut | |
| dc.date.accessioned | 2025-01-24T11:22:06Z | |
| dc.date.available | 2025-01-24T11:22:06Z | |
| dc.date.issued | 2020 | |
| dc.description.abstract | Oxidative degradation of emerging waterborne contaminants, particularly pharmaceuticals, is currently an extensively studied field of research. In this study, a UV-254 nm activated persulfate (PS) system (UV254/PS) was used to eliminate Theophylline (TP) from simulated and real industrial effluents. Results showed that TP is strongly resistant to degradation through direct photolysis under UV-254 nm irradiation. UV254/PS system showed efficient degradation, in which [PS]0 = 0.25 mM achieved total degradation of [TP]0 = 10 mg L−1 in a period of 20 min and followed a pseudo-first order reaction kinetics (kobs = 0.173 (±0.004) min−1). Effect of several matrix parameters were tested to study the robustness of TP degradation in real-life cases such as pH, chlorides, bicarbonates, and dissolved oxygen, in which neutral pH gave the highest degradation rate (kobs = 0.40 (±0.03) min−1), chlorides and bicarbonates showed minimal impact, and anoxic conditions inhibited TP degradation with a significant decrease in kobs e.g. 0.817 (±0.41) × 10−1 min−1. Additionally, TP was spiked into natural spring, sea and wastewater, where the three tested matrices showed a decrease in the degradation rate, with the latter being the most significant (kobs = 6.9 (±0.9) × 10−3 min−1). Radical scavenging experiments showed that sulfate radicals were the main contributors in TP degradation. Furthermore, wastewater effluent obtained from a local pharmaceutical manufacturing facility and containing [TP]0 = 160 mg L−1 was also tested and showed successful full degradation over 3 h in 25 mM PS-spiked medium with an average reaction stoichiometric efficiency of about 3.7% and at an estimated cost of 17.2 $ m−3. © 2019 Elsevier B.V. | |
| dc.identifier.doi | https://doi.org/10.1016/j.cej.2019.122478 | |
| dc.identifier.eid | 2-s2.0-85070705290 | |
| dc.identifier.uri | http://hdl.handle.net/10938/25430 | |
| dc.language.iso | en | |
| dc.publisher | Elsevier B.V. | |
| dc.relation.ispartof | Chemical Engineering Journal | |
| dc.source | Scopus | |
| dc.subject | Aops | |
| dc.subject | Persulfate | |
| dc.subject | Pharmaceutical effluent treatment | |
| dc.subject | Theophylline | |
| dc.subject | Uv-254 nm | |
| dc.subject | Chlorine compounds | |
| dc.subject | Degradation | |
| dc.subject | Dissolved oxygen | |
| dc.subject | Effluent treatment | |
| dc.subject | Effluents | |
| dc.subject | Free radical reactions | |
| dc.subject | Photolysis | |
| dc.subject | Reaction kinetics | |
| dc.subject | Sewage | |
| dc.subject | Sulfur compounds | |
| dc.subject | Oxidative degradation | |
| dc.subject | Pharmaceutical manufacturing facilities | |
| dc.subject | Pseudo-first order reactions | |
| dc.subject | Water-borne contaminants | |
| dc.subject | Photodegradation | |
| dc.title | Degradation of theophylline in a UV254/PS system: Matrix effect and application to a factory effluent | |
| dc.type | Article |
Files
Original bundle
1 - 1 of 1