New airborne pathogen transport model for upper-room UVGI spaces conditioned by chilled ceiling and mixed displacement ventilation: Enhancing air quality and energy performance

dc.contributor.authorKanaan, Mohamad
dc.contributor.authorGhaddar, Nesreen K.
dc.contributor.authorGhali, Kamel Abou
dc.contributor.authorAraj, George F.
dc.contributor.departmentDepartment of Mechanical Engineering
dc.contributor.departmentPathology and Laboratory Medicine
dc.contributor.facultyMaroun Semaan Faculty of Engineering and Architecture (MSFEA)
dc.contributor.facultyFaculty of Medicine (FM)
dc.contributor.institutionAmerican University of Beirut
dc.date.accessioned2025-01-24T11:32:00Z
dc.date.available2025-01-24T11:32:00Z
dc.date.issued2014
dc.description.abstractThe maximum allowable return air ratio in chilled ceiling (CC) and mixed displacement ventilation (DV) system for good air quality is regulated by acceptable levels of CO2 concentration not to exceed 700 ppm and airborne bacterial count to satisfy World Health Organization (WHO) requirement for bacterial count not to exceed 500 CFU/m3. Since the CC/DV system relies on buoyancy effects for driving the contaminated air upwards, infectious particles will recirculate in the upper zone allowing effective utilization of upper-room ultraviolet germicidal irradiation (UVGI) to clean return air. The aim of this work is to develop a new airborne bacteria transport plume-multi-layer zonal model at low computational cost to predict bacteria concentration distribution in mixed CC/DV conditioned room without and with upper-room UVGI installed. The results of the simplified model were compared with layer-averaged concentration predictions of a detailed and experimentally-validated 3-D computational fluid dynamics (CFD) model. The comparison showed good agreement between bacteria transport model results and CFD predictions of room air bacteria concentration with maximum error of ±10.4 CFU/m3 in exhaust air. The simplified model captured the vertical bacteria concentration distribution in room air as well as the locking effect of highest concentration happening at the stratification level. The developed bacteria transport model was used in a case study to determine the return air mixing ratio that minimizes energy consumption and maintains acceptable IAQ with and without UVGI. Results showed that the use of upper-room UVGI resulted in 35% in energy saving, whereas the use of in-duct UVGI achieved no more than 12% energy saving, both compared to 100% fresh air case. © 2014 Elsevier Ltd. All rights reserved.
dc.identifier.doihttps://doi.org/10.1016/j.enconman.2014.05.073
dc.identifier.eid2-s2.0-84902681525
dc.identifier.urihttp://hdl.handle.net/10938/27637
dc.language.isoen
dc.publisherElsevier Ltd
dc.relation.ispartofEnergy Conversion and Management
dc.sourceScopus
dc.subjectAir disinfection
dc.subjectEnergy efficiency
dc.subjectMixed displacement ventilation
dc.subjectModeling bacteria transport
dc.subjectUv germicidal irradiation
dc.subjectAir quality
dc.subjectCarbon dioxide
dc.subjectComputational fluid dynamics
dc.subjectEnergy utilization
dc.subjectForecasting
dc.subjectIrradiation
dc.subjectMicrochannels
dc.subjectModels
dc.subjectBacteria concentrations
dc.subjectBacteria transport
dc.subjectComputational fluid dynamics modeling
dc.subjectConcentration prediction
dc.subjectDisplacement ventilation
dc.subjectStratification levels
dc.subjectUltraviolet germicidal irradiations
dc.subjectWorld health organization
dc.subjectVentilation
dc.titleNew airborne pathogen transport model for upper-room UVGI spaces conditioned by chilled ceiling and mixed displacement ventilation: Enhancing air quality and energy performance
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
2014-10888.pdf
Size:
1.76 MB
Format:
Adobe Portable Document Format