Browsing by Author "ME"

Now showing items 1-20 of 91

3D Autocomplete: Enhancing UAV Teleoperation with AI in the Loop

Ibrahim, Batool

Manually teleoperating a flying robot can be a demanding task, especially for users with limited levels of experience. This is primarily due to the nonlinear properties of such robots in addition to the difficulty of ...
Analysis of The Hydrogeological Conditions Affecting Fault Response To Nearby Hydraulic Fracturing

Yassine, Dima (1/15/2022)

The response of critically stressed dormant faults to fluid perturbation, by oil and gas production activities, has been a major public concern because of its link to induced seismicity (IS). In this paper, we study the ...
An Application of Neural Networks in Predictive Construction Equipment Maintenance

Yamout, Omar (9/13/2022)

Construction project equipment are subject to several types of breakdowns throughout the project duration. As a result, contractors and equipment operators are keen to establish and adopt effective equipment maintenance ...
Artificial Intelligence for Security of IoT Devices

Abdul Ghani, Hadi (7/27/2022)

Physical Layer Security relies on detecting suspected behaviors from the communicated device while authenticating it. It makes use of physical layer attributes to secure the communication. Examples of these attributes are ...
ASSESSING THE EFFECT OF DIFFERENT FIBERS ON CONCRETE CONSISTENCY AND DURABILITY

Farhat, Ali (2/3/2023)

Concrete is becoming an inevitable building material. Its development is usually linked to an industrial and architectural improvement. To improve the material behavior, different types of additives and byproducts have ...
ASSESSING THE EFFECT OF DIFFERENT FIBERS ON SHEAR STRENGTH OF REINFORCED CONCRETE MEMBERS

Al Ghali, Alaa Eldeen (2/3/2023)

Concrete is the most widely used building material in the world. The single largest limitation of concrete is its weak and brittle nature under tensile stress. To improve concrete behavior, reinforcement materials that ...
Assessing The Effect of Different Fibers On Structural Mechanical Properties

Chahrour, Adel (2/6/2023)

Concrete is the most widely used building material in the world. The single largest limitation of concrete is its weak and brittle nature under tensile stress. To improve this concrete behavior, reinforcement materials ...
ASSESSING THE ENVIRONMENTAL IMPACT OF THE ENERGY CRISIS ON GREATER BEIRUT AREA AND LEBANON IN GENERAL

Al Sarih, Rayan (2023-09-12)

The deterioration of air quality in Lebanon is a growing environmental concern as it negatively impacts the public health, and the environment in general. According to the World Health Organization (WHO) 4.2 million ...
The Assessment and Enhancement of Thermal Comfort in the Makased Schools, Beirut

Zakharia, Michel (5/18/2022)

Improving the thermal behavior of old buildings’ external envelope to meet current standards is a subject that every country needs to tackle when talking about eco-efficient building design. In cities, buildings constructed ...
Assessment of intermetallic compounds within dissimilar joints using nonlinear guided-wave features

Mansour, Mirna (2023-12-21)

Welding dissimilar materials is widely employed in industrial construction and manufacturing to enhance cost-effectiveness and performance, often utilizing non-fusion methods like solid-state and high-energy beam welding. ...
Automatic Reconstruction of Glass Relics Using Manifold Learning

Kawtharani, Rabab (2024-02-12)

The risk imposed by manual reassembly on valuable broken relics necessitates automating this process by leveraging computer vision for 3D data acquisition, and data science to extract features of interest from high ...
Behavior of Biocemented Sands under Cyclic Loading

Antar, Mohammed (2/8/2022)

In the past ten years, intensive research efforts were undertaken to study a newly emerging soil improvement technique that uses calcite-inducing reactions to produce natural cementation in soils. Given the fact that current ...
Behavior of Normal Strength Reinforced Concrete Structures Incorporating Slag/Ceramic Binders

Abu Rachied, Tarik (2022-05-18)

Concrete incorporating ceramic hybrid binders is a sustainable material prepared by partial replacement of Portland cement with a proper dosage of ceramic powder and mineral admixtures or pozzolanic materials. This research ...
Bioremediation of Petroleum Tar and Characterization of the Associated Microbial Community

Al Haj Chehadeh, Baraa (5/8/2023)

The heavy oil tanker traffic and planned oil and gas activities off the Mediterranean Sea shorelines have increased the risks of oil spills and the subsequent contamination of the marine environment with crude oil and tar ...
Characterization of the Construction Period of Buildings in Beirut from Street-View Photos Using Deep Learning

Wardan, David (2023-09-07)

Multiple efforts have contributed to collecting data on the built environment in Beirut. However, these efforts usually rely on field visits that are time-consuming. Until now no complete dataset that provides the ...
A Circularly Polarized Millimetre-Wave Phased Array for 5G Systems

Jabri, Ahmad (1/20/2022)

With the rise of 5G technology, communication systems are required to support high data rates with wide-band operational frequencies within the millimetre wave regime. Current deployed systems that operate at lower microwave ...
Comparative Assessment of Different Static Mixers Using CFD

Chakleh, Ranim (5/5/2022)

A numerical investigation was carried out to compare the hydrodynamics and the mixing performance of three variants of static mixers under turbulent flow conditions where the pipe Reynolds numbers varied between 5,000 and ...
Coordination of Automotive Active Safety Systems via Global Chassis Envelope Control

Hoteit, Rawan (2024-05-13)

Ground vehicles, characterized by their inherently over-actuated nature, serve as a foundation for the development of hierarchical control frameworks and control allocation schemes, which may be strategically harnessed and ...
Coverage Control for an Over-Actuated Remotely Operated Vehicle

Fadel, Farah (2/10/2022)

A Remotely Operated Vehicle (ROV) assists in performing missions underwater. Equipment such as cameras, lights, and robotic arms are assembled on the ROV to help complete the required task. In this thesis, the motivation ...
Detection and Quantification of Nickel and Cadmium in Clay Agricultural Soil Using Hyperspectral Imaging and Artificial Intelligence-A Case Study in Lebanon

Moussa, Layan (2024-02-06)

Heavy metal contamination in agricultural soils poses serious environmental and health problems. Intensive efforts are employed to improve existing quantification methods of heavy metals in contaminated environments. ...

Now showing items 1-20 of 91

Search AUB ScholarWorks

Browse

All of AUB ScholarWorks

My Account

Copyright Statement

All materials included in the institutional repository are protected by copyright laws and are the property of their respective copyright holders. Materials may be used for non-commercial, educational, or research purposes only, and must be cited or attributed to the original source. Permission for any other use must be obtained from the copyright holder(s) directly. The American University of Beirut Libraries does not assume responsibility for any infringement of copyright laws that may occur as a result of the use of materials in the repository. If you believe that your copyright has been infringed upon in the repository, please contact the AUB Libraries immediately.

For further information, please contact us at scholarworks@aub.edu.lb

Browsing by Author "ME"

Browsing by Author "ME"

Search AUB ScholarWorks

Browse

All of AUB ScholarWorks

My Account

Copyright Statement