dc.contributor.author |
Jammal, Jihad Mohamad, |
dc.date |
2013 |
dc.date.accessioned |
2015-02-03T10:23:35Z |
dc.date.available |
2015-02-03T10:23:35Z |
dc.date.issued |
2013 |
dc.date.submitted |
2013 |
dc.identifier.other |
b17932956 |
dc.identifier.uri |
http://hdl.handle.net/10938/10001 |
dc.description |
Thesis (M.E.)-- American University of Beirut, Department of Civil and Environmental Engineeering, 2013. |
dc.description |
Advisor : Dr. Ghassan Riad Chehab, Associate Professor, Civil and Environmental Engineering ; Members of Committee : Dr. Shadi Najjar, Assistant Professor, Civil and Environmental Engineering ; Dr. Issam Srour, Assistant Professor, Engineering Management. |
dc.description |
Includes bibliographical references (leaves 87-89) |
dc.description.abstract |
The objective of the research herein is to conduct the dynamic modulus |Ẹ*| simple performance test on acquired Lebanese asphalt pavement mixtures from three construction sites in order to set a milestone for the development of a dynamic modulus |Ẹ*| masturecurve database. This latter will serve in providing a more realistic and field representative mixture characterization for design and quality control purposes. In addition, the tested mixes have been classified and checked for compatibility with Superpave acceptance criteria. Further, a fourth asphalt pavement mix has been laboratory prepared by replacing 15percent of the fine aggregate material passing sieve number 8 by CDW fine aggregate material. The in-house prepared mixe was also tested and the effect of the 15percent CDW fine aggregate material addition to asphalt pavements has been described. Fatigue and rutting performance of the acquired asphalt mixes from the three construction sites in Lebanon have been determined for the purpose of future comparison to actual infield performance and ultimately the local calibration of performance models. Predicted performance results have been compared and interpreted in reference to the mixes gradations, asphalt contents, and layer types for both thin and thick pavements. |
dc.format.extent |
xiv, 100 leaves : illustrations (some color) ; 30 cm |
dc.language.iso |
eng |
dc.relation.ispartof |
Theses, Dissertations, and Projects |
dc.subject.classification |
ET:005958 AUBNO |
dc.subject.lcsh |
Pavements, Asphalt -- Performance -- Testing. |
dc.subject.lcsh |
Pavements -- Performance -- Testing. |
dc.subject.lcsh |
Materials -- Fatigue -- Testing. |
dc.subject.lcsh |
Highway engineering. |
dc.subject.lcsh |
Materials science. |
dc.subject.lcsh |
Materials -- Dynamic testing. |
dc.title |
Evaluation and application of SPT (simple performance test) and distress predictive models on hot mix asphalt pavements in Lebanon - |
dc.type |
Thesis |
dc.contributor.department |
American University of Beirut. Faculty of Engineering and Architecture. Department of Civil and Environmental Engineeering. degree granting institution. |