AUB ScholarWorks

Impact of integrating desiccant dehumidification processes to conventional AC system on urban microclimate and energy use in Beirut city -

Show simple item record

dc.contributor.author Ghaddar, Zeinab Naji,
dc.date.accessioned 2017-12-11T16:29:14Z
dc.date.available 2017-12-11T16:29:14Z
dc.date.issued 2017
dc.date.submitted 2017
dc.identifier.other b19244502
dc.identifier.uri http://hdl.handle.net/10938/20927
dc.description Thesis. M.E. American University of Beirut. Department of Mechanical Engineering, 2017. ET:6671
dc.description Advisor : Prof. Kamel Ghali, PhD, Professor, Mechanical Engineering ; Co-Advisor : Prof. Nesreen Ghaddar, PhD, Professor, Mechanical Engineering ; Members of Committee : Prof. Issam Srour, PhD, Associate Professor, Civil and Environmental Engineering ; Prof. Ghassan Chehab, PhD, Associate Professor, Civil and Environmental Engineering.
dc.description Includes bibliographical references (leaves 45-49)
dc.description.abstract This study investigates the anthropogenic heating of the urban environment of Beirut city due to air conditioning (AC) when integrating a desiccant dehumidification wheel into the conventional vapor compression (VC) system to reduce the high electricity consumption during the summer. Two hybrid system configurations with integrated heat exchanger (HE) and an indirect evaporative cooler (IEC) are studied. Numerical simulations of the urban microclimate for the hot humid weather of Beirut were performed. The simulation results were validated by comparing measured and predicted air temperatures in four locations of the city assuming the use of conventional VC systems. Simulations were then performed using the proposed interventions of the two hybrid systems. The results showed that the conventional AC systems cause an average increase in the urban ambient temperature in Beirut city of 1.3 °C in day-time and 2.2 °C in night-time when compared with the case with no AC. The electrical power consumption of IEC and HE systems was lower by 53percent and 38percent than conventional VC systems, respectively. Compared to the conventional VC system, the sensible waste heat of Hybrid AC with IEC and Hybrid AC with HE were higher by about 2percent and 10percent respectively due to the regeneration process. The latent waste heat of Hybrid systems with IEC and HE were higher by 7.9 and 5.7 times the latent waste of the conventional VC system. As a result, the hybrid systems with IEC produced a lower increase in temperature by about 0.1 °C to 0.3 °C in day-time and night-time while the hybrid systems with HE produced a higher increase in temperature by about 0.1 °C to 0.3 °C in day-time and night-time, due to the higher release of sensible waste heat than conventional system. The relative humidity in the cases of HE and IEC were higher by a maximum of about 3percent and 5percent compared to VC case, respectively. The IEC system is therefore recommended due to its high potential for electricity savings and lower impact on the ur
dc.format.extent 1 online resource (xiii, 49 leaves) : color illustrations
dc.language.iso eng
dc.relation.ispartof Theses, Dissertations, and Projects
dc.subject.classification ET:006671
dc.subject.lcsh Air conditioning -- Lebanon -- Beirut.
dc.subject.lcsh Urban heat island -- Lebanon -- Beirut.
dc.subject.lcsh Drying agents.
dc.subject.lcsh Evaporative cooling -- Lebanon -- Beirut.
dc.title Impact of integrating desiccant dehumidification processes to conventional AC system on urban microclimate and energy use in Beirut city -
dc.type Thesis
dc.contributor.department Faculty of Engineering and Architecture.
dc.contributor.department Department of Mechanical Engineering,
dc.contributor.institution American University of Beirut.


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search AUB ScholarWorks


Browse

My Account